Requesting speedtest from someone with VPS in the USA on a 2.5Gbps network

richw

I'm just requesting for anyone who has a 2.5Gbps VPS in the USA location to run a speedtest and provide me the results. Would be greatly appreciated.

Context:
I'm interested in the VPS 8000 G11 with USA location. I seen this comparison of all the VPS options (1st image attached), and it shows it on a 2.5Gbps network card- however this comparison page I can't find anymore. In the product details for VPS 8000 G11 (2nd image attached), it doesn't specifically say 2.5Gbps, but I'm assuming it is. So just curious on what the speed is before I make my purchase- I reached out to support via email and they didn't want to run a speedtest for me, so hoping someone here has a VPS in their USA location on a 2.5Gbps to provide speedtest results for me.

ArtCore7

not my Server, it is from a other Thread in this Forum

Code

# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
#              Yet-Another-Bench-Script              #
#                     v2024-06-09                    #
# https://github.com/masonr/yet-another-bench-script #
# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #

Sat Aug 10 01:09:21 PM UTC 2024

Basic System Information:
---------------------------------
Uptime     : 0 days, 1 hours, 29 minutes
Processor  : AMD EPYC 9634 84-Core Processor
CPU cores  : 8 @ 2246.624 MHz
AES-NI     : ✔ Enabled
VM-x/AMD-V : ❌ Disabled
RAM        : 15.6 GiB
Swap       : 0.0 KiB
Disk       : 511.1 GiB
Distro     : Debian GNU/Linux bookworm/sid
Kernel     : 6.0.0-4-amd64
VM Type    : MICROSOFT
IPv4/IPv6  : ✔ Online / ❌ Offline

IPv4 Network Information:
---------------------------------
ISP        : netcup GmbH
ASN        : AS214996 netcup GmbH
Host       : netcup GmbH
Location   : Manassas, Virginia (VA)
Country    : United States

fio Disk Speed Tests (Mixed R/W 50/50) (Partition /dev/vdb3):
---------------------------------
Block Size | 4k            (IOPS) | 64k           (IOPS)
  ------   | ---            ----  | ----           ---- 
Read       | 69.11 MB/s   (17.2k) | 662.75 MB/s  (10.3k)
Write      | 69.32 MB/s   (17.3k) | 666.24 MB/s  (10.4k)
Total      | 138.43 MB/s  (34.6k) | 1.32 GB/s    (20.7k)
           |                      |                     
Block Size | 512k          (IOPS) | 1m            (IOPS)
  ------   | ---            ----  | ----           ---- 
Read       | 1.25 GB/s     (2.4k) | 1.21 GB/s     (1.1k)
Write      | 1.31 GB/s     (2.5k) | 1.30 GB/s     (1.2k)
Total      | 2.56 GB/s     (5.0k) | 2.52 GB/s     (2.4k)

iperf3 Network Speed Tests (IPv4):
---------------------------------
Provider        | Location (Link)           | Send Speed      | Recv Speed      | Ping           
-----           | -----                     | ----            | ----            | ----           
Clouvider       | London, UK (10G)          | 1.58 Gbits/sec  | 1.13 Gbits/sec  | 78.4 ms        
Eranium         | Amsterdam, NL (100G)      | 1.87 Gbits/sec  | 2.01 Gbits/sec  | 94.6 ms        
Uztelecom       | Tashkent, UZ (10G)        | 891 Mbits/sec   | 413 Mbits/sec   | 174 ms         
Leaseweb        | Singapore, SG (10G)       | busy            | 620 Mbits/sec   | 238 ms         
Clouvider       | Los Angeles, CA, US (10G) | 1.95 Gbits/sec  | 2.14 Gbits/sec  | 55.7 ms        
Leaseweb        | NYC, NY, US (10G)         | 2.74 Gbits/sec  | 2.33 Gbits/sec  | 7.43 ms        
Edgoo           | Sao Paulo, BR (1G)        | 1.44 Gbits/sec  | 922 Mbits/sec   | 140 ms         

Geekbench 6 Benchmark Test:
---------------------------------
Test            | Value                         
                |                               
Single Core     | 1508                          
Multi Core      | 7415                          
Full Test       | https://browser.geekbench.com/v6/cpu/7274490

YABS completed in 10 min 36 sec

Alles anzeigen

And a VPS1000 USA YABS Result: https://www.vpsbenchmarks.com/yabs/netcup-4c-8gb-655247

andreas.

Zitat von ArtCore7

not my Server, it is from a other Thread in this Forum

Code

# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
#              Yet-Another-Bench-Script              #
#                     v2024-06-09                    #
# https://github.com/masonr/yet-another-bench-script #
# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #

Sat Aug 10 01:09:21 PM UTC 2024

Basic System Information:
---------------------------------
Uptime     : 0 days, 1 hours, 29 minutes
Processor  : AMD EPYC 9634 84-Core Processor
CPU cores  : 8 @ 2246.624 MHz
AES-NI     : ✔ Enabled
VM-x/AMD-V : ❌ Disabled
RAM        : 15.6 GiB
Swap       : 0.0 KiB
Disk       : 511.1 GiB
Distro     : Debian GNU/Linux bookworm/sid
Kernel     : 6.0.0-4-amd64
VM Type          : MICROSOFT
IPv4/IPv6  : ✔ Online / ❌ Offline

IPv4 Network Information:
---------------------------------
ISP        : netcup GmbH
ASN        : AS214996 netcup GmbH
Host       : netcup GmbH
Location   : Manassas, Virginia (VA)
Country    : United States

fio Disk Speed Tests (Mixed R/W 50/50) (Partition /dev/vdb3):
---------------------------------
Block Size | 4k            (IOPS) | 64k           (IOPS)
  ------   | ---            ----  | ----           ---- 
Read       | 69.11 MB/s   (17.2k) | 662.75 MB/s  (10.3k)
Write      | 69.32 MB/s   (17.3k) | 666.24 MB/s  (10.4k)
Total      | 138.43 MB/s  (34.6k) | 1.32 GB/s    (20.7k)
           |                      |                     
Block Size | 512k          (IOPS) | 1m            (IOPS)
  ------   | ---            ----  | ----           ---- 
Read       | 1.25 GB/s     (2.4k) | 1.21 GB/s     (1.1k)
Write      | 1.31 GB/s     (2.5k) | 1.30 GB/s     (1.2k)
Total      | 2.56 GB/s     (5.0k) | 2.52 GB/s     (2.4k)

...

Alles anzeigen

And a VPS1000 USA YABS Result: https://www.vpsbenchmarks.com/yabs/netcup-4c-8gb-655247

Was mir bei der Messung auffällt, ist dass die Daten nun so aussehen, als würde Netcup zukünftig den Hypervisor von Microsoft einsetzen. Siehe Zeile "VM Type".

Auch die IO-Werte für die Block Sizes 512 und 1024k sehen bei dieser Serie auch besser aus.

cltrmx

Zitat von andreas.

Was mir bei der Messung auffällt, ist dass die Daten nun so aussehen, als würde Netcup zukünftig den Hypervisor von Microsoft einsetzen. Siehe Zeile "VM Type".

Was genau meinst du mit "den Hypervisor von Microsoft"?

m_ueberall

Zitat von cltrmx

Was genau meinst du mit "den Hypervisor von Microsoft"?

Code

VM Type          : MICROSOFT

Siehe yabs.sh und systemd-detect-virt: "microsoft" bezieht sich auf "Hyper-V, also known as Viridian or Windows Server Virtualization"

KrisAusEU · Screenshot 2025-02-23 172345.png

gem

Ich habe seit einiger Zeit die seltsame Konstellation, dass der Server in Manassas "gefühlt" recht gut angebunden ist, dafür habe ich bei Verbindungen zu meinen NC-Servern in Nürnberg durchgehend bescheidene 20 Mbit/s. Ein Satelliten-System mit gespiegelten Daten ist damit undenkbar.

Kann das jemand nachvollziehen oder erklären?

Code

iperf3 Network Speed Tests (IPv4):
---------------------------------
Provider        | Location (Link)           | Send Speed      | Recv Speed      | Ping
-----           | -----                     | ----            | ----            | ----
Clouvider       | London, UK (10G)          | 210 Mbits/sec   | 947 Mbits/sec   | --
Eranium         | Amsterdam, NL (100G)      | 172 Mbits/sec   | 1.98 Gbits/sec  | --
Uztelecom       | Tashkent, UZ (10G)        | 84.5 Mbits/sec  | 764 Mbits/sec   | --
Leaseweb        | Singapore, SG (10G)       | 57.1 Mbits/sec  | 1.36 Gbits/sec  | --
Clouvider       | Los Angeles, CA, US (10G) | 278 Mbits/sec   | 2.10 Gbits/sec  | --
Leaseweb        | NYC, NY, US (10G)         | 2.01 Gbits/sec  | 2.38 Gbits/sec  | --
Edgoo           | Sao Paulo, BR (1G)        | 114 Mbits/sec   | 1.18 Gbits/sec  | --

iperf3 Network Speed Tests (IPv6):
---------------------------------
Provider        | Location (Link)           | Send Speed      | Recv Speed      | Ping
-----           | -----                     | ----            | ----            | ----
Clouvider       | London, UK (10G)          | 207 Mbits/sec   | 1.48 Gbits/sec  | --
Eranium         | Amsterdam, NL (100G)      | 174 Mbits/sec   | 1.82 Gbits/sec  | --
Uztelecom       | Tashkent, UZ (10G)        | 93.8 Mbits/sec  | 1.15 Gbits/sec  | --
Leaseweb        | Singapore, SG (10G)       | 59.7 Mbits/sec  | busy            | --
Clouvider       | Los Angeles, CA, US (10G) | 283 Mbits/sec   | 2.05 Gbits/sec  | --
Leaseweb        | NYC, NY, US (10G)         | 2.12 Gbits/sec  | 2.35 Gbits/sec  | --
Edgoo           | Sao Paulo, BR (1G)        | 114 Mbits/sec   | 1.15 Gbits/sec  | --

Alles anzeigen

Interessent

Zitat von gem

Ich habe seit einiger Zeit die seltsame Konstellation, dass der Server in Manassas "gefühlt" recht gut angebunden ist, dafür habe ich bei Verbindungen zu meinen NC-Servern in Nürnberg durchgehend bescheidene 20 Mbit/s. Ein Satelliten-System mit gespiegelten Daten ist damit undenkbar.

Kann das jemand nachvollziehen oder erklären?

Na, America First

[netcup] Sarah G. 18. Februar 2025 um 15:03