Hallo,
ich verzweifele gerade an der Konfiguration von IPv6 unter Debian 10.
Ich habe die beiden Einträge unten gemacht, dann den Server ausgeschaltet (übers Webinterface), etwas gewartet und wieder eingeschaltet. IPv4 funktioniert problemlos, aber IPv6 mag nicht. Weder raus noch rein.
Hat jemand eine Idee, was ich da falsch mache?
Code
cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
#allow-hotplug ens3
#iface ens3 inet dhcp
auto ens3
iface ens3 inet static
address 5.45.XXX.XXX
netmask 255.255.252.0
broadcast 5.45.107.255
gateway 5.45.XXX.1
iface ens3 inet6 static
address 2a03:4000:XX:1XXX::1
netmask 64
gateway fe80::1
*******
cat /etc/sysctl.d/50-IPv6.conf
net.ipv6.conf.default.accept_ra=0
net.ipv6.conf.default.autoconf=0
net.ipv6.conf.all.accept_ra=0
net.ipv6.conf.all.autoconf=0
net.ipv6.conf.ens3.accept_ra=0
net.ipv6.conf.ens3.autoconf=0
net.ipv6.conf.eth0.accept_ra=0
net.ipv6.conf.eth0.autoconf=0
Alles anzeigen