WireGuard Benchmark VPS Pico und Nano

Homwer · 1. Dezember 2023

Moin,

ich wollte mal fragen ob noch jemand den Pico / Nano als Wireguard Server nutzt und welche Geschwindigkeiten ihr dort erreicht.
Bei mir sind es auf beiden Servern um die 300 Mbit.

Der Pico braucht dabei ca. 50% CPU und der Nano 25% der CPU.
Aber schneller wird auch der Nano nicht.

Deckt sich das mit euren Zahlen?
Bitte nicht falsch verstehen, 300 Mbit über WireGuard VPN sind real 600 Mbit am Server, das ist sehr gute Leistung für den Preis! Ich frage rein aus Interesse und neugiere und nicht um zu meckern

frank_m · 1. Dezember 2023

iperf3 über Wireguard von einem VPS PICO auf einen RS 2000.

RS2000: Ubuntu 22.04

VPS PICO: Debian 12

Client war der Pico, also der erste Block ist Upload, der 2. Download (aus Sicht des Pico).

Code

Connecting to host 192.168.200.1, port 5006
Reverse mode, remote host 192.168.200.1 is sending
[  5] local 192.168.200.7 port 42830 connected to 192.168.200.1 port 5006
[  7] local 192.168.200.7 port 42846 connected to 192.168.200.1 port 5006
[  9] local 192.168.200.7 port 42862 connected to 192.168.200.1 port 5006
[ 11] local 192.168.200.7 port 42864 connected to 192.168.200.1 port 5006
[ 13] local 192.168.200.7 port 42870 connected to 192.168.200.1 port 5006
[ 15] local 192.168.200.7 port 42882 connected to 192.168.200.1 port 5006
[ 17] local 192.168.200.7 port 42886 connected to 192.168.200.1 port 5006
[ 19] local 192.168.200.7 port 42892 connected to 192.168.200.1 port 5006
[ 21] local 192.168.200.7 port 42900 connected to 192.168.200.1 port 5006
[ 23] local 192.168.200.7 port 42914 connected to 192.168.200.1 port 5006
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.01  sec  61.4 MBytes  51.4 Mbits/sec   55             sender
[  5]   0.00-10.00  sec  61.0 MBytes  51.1 Mbits/sec                  receiver
[  7]   0.00-10.01  sec  59.3 MBytes  49.7 Mbits/sec   55             sender
[  7]   0.00-10.00  sec  58.9 MBytes  49.4 Mbits/sec                  receiver
[  9]   0.00-10.01  sec  63.2 MBytes  52.9 Mbits/sec   49             sender
[  9]   0.00-10.00  sec  62.6 MBytes  52.5 Mbits/sec                  receiver
[ 11]   0.00-10.01  sec  53.8 MBytes  45.1 Mbits/sec   54             sender
[ 11]   0.00-10.00  sec  53.4 MBytes  44.8 Mbits/sec                  receiver
[ 13]   0.00-10.01  sec  59.8 MBytes  50.1 Mbits/sec   49             sender
[ 13]   0.00-10.00  sec  59.5 MBytes  49.9 Mbits/sec                  receiver
[ 15]   0.00-10.01  sec  63.1 MBytes  52.9 Mbits/sec   48             sender
[ 15]   0.00-10.00  sec  62.7 MBytes  52.6 Mbits/sec                  receiver
[ 17]   0.00-10.01  sec  72.7 MBytes  61.0 Mbits/sec   45             sender
[ 17]   0.00-10.00  sec  72.0 MBytes  60.4 Mbits/sec                  receiver
[ 19]   0.00-10.01  sec  58.6 MBytes  49.1 Mbits/sec   50             sender
[ 19]   0.00-10.00  sec  58.3 MBytes  48.9 Mbits/sec                  receiver
[ 21]   0.00-10.01  sec  57.8 MBytes  48.4 Mbits/sec   54             sender
[ 21]   0.00-10.00  sec  56.8 MBytes  47.6 Mbits/sec                  receiver
[ 23]   0.00-10.01  sec  63.7 MBytes  53.4 Mbits/sec   48             sender
[ 23]   0.00-10.00  sec  62.9 MBytes  52.8 Mbits/sec                  receiver
[SUM]   0.00-10.01  sec   613 MBytes   514 Mbits/sec  507             sender
[SUM]   0.00-10.00  sec   608 MBytes   510 Mbits/sec                  receiver

iperf Done.
root@serv3:~# iperf3 -c 192.168.200.1 -p 5006 -P 10
Connecting to host 192.168.200.1, port 5006
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  85.3 MBytes  71.5 Mbits/sec    0             sender
[  5]   0.00-10.02  sec  82.0 MBytes  68.7 Mbits/sec                  receiver
[  7]   0.00-10.00  sec  84.9 MBytes  71.2 Mbits/sec    1             sender
[  7]   0.00-10.02  sec  81.9 MBytes  68.5 Mbits/sec                  receiver
[  9]   0.00-10.00  sec  86.1 MBytes  72.2 Mbits/sec    0             sender
[  9]   0.00-10.02  sec  81.9 MBytes  68.5 Mbits/sec                  receiver
[ 11]   0.00-10.00  sec  85.7 MBytes  71.9 Mbits/sec    0             sender
[ 11]   0.00-10.02  sec  81.9 MBytes  68.5 Mbits/sec                  receiver
[ 13]   0.00-10.00  sec  82.8 MBytes  69.5 Mbits/sec    1             sender
[ 13]   0.00-10.02  sec  81.9 MBytes  68.5 Mbits/sec                  receiver
[ 15]   0.00-10.00  sec  82.7 MBytes  69.4 Mbits/sec    1             sender
[ 15]   0.00-10.02  sec  81.9 MBytes  68.5 Mbits/sec                  receiver
[ 17]   0.00-10.00  sec  85.0 MBytes  71.3 Mbits/sec    3             sender
[ 17]   0.00-10.02  sec  81.9 MBytes  68.5 Mbits/sec                  receiver
[ 19]   0.00-10.00  sec  85.4 MBytes  71.6 Mbits/sec    2             sender
[ 19]   0.00-10.02  sec  81.9 MBytes  68.5 Mbits/sec                  receiver
[ 21]   0.00-10.00  sec  85.0 MBytes  71.3 Mbits/sec    2             sender
[ 21]   0.00-10.02  sec  81.9 MBytes  68.5 Mbits/sec                  receiver
[ 23]   0.00-10.00  sec  85.0 MBytes  71.3 Mbits/sec    1             sender
[ 23]   0.00-10.02  sec  81.9 MBytes  68.5 Mbits/sec                  receiver
[SUM]   0.00-10.00  sec   848 MBytes   711 Mbits/sec   11             sender
[SUM]   0.00-10.02  sec   819 MBytes   686 Mbits/sec                  receiver

Alles anzeigen

frank_m · 1. Dezember 2023

ich hab übrigens gerade noch mal nur einer Verbindung gegengetestet:

Code

root@serv3:~# iperf3 -c 192.168.200.1 -p 5006
Connecting to host 192.168.200.1, port 5006
[  5] local 192.168.200.7 port 34718 connected to 192.168.200.1 port 5006
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  31.8 MBytes   267 Mbits/sec    0    347 KBytes
[  5]   1.00-2.00   sec  59.7 MBytes   501 Mbits/sec    0    524 KBytes
[  5]   2.00-3.00   sec  58.5 MBytes   491 Mbits/sec    0    601 KBytes
[  5]   3.00-4.00   sec  58.2 MBytes   488 Mbits/sec    0    629 KBytes
[  5]   4.00-5.00   sec  42.4 MBytes   355 Mbits/sec    0    661 KBytes
[  5]   5.00-6.00   sec  38.7 MBytes   325 Mbits/sec    0    661 KBytes
[  5]   6.00-7.00   sec  54.4 MBytes   457 Mbits/sec    0    661 KBytes
[  5]   7.00-8.00   sec  41.6 MBytes   349 Mbits/sec    0    661 KBytes
[  5]   8.00-9.00   sec  43.7 MBytes   367 Mbits/sec    0    661 KBytes
[  5]   9.00-10.00  sec  51.7 MBytes   434 Mbits/sec    0    778 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec   481 MBytes   403 Mbits/sec    0             sender
[  5]   0.00-10.04  sec   479 MBytes   400 Mbits/sec                  receiver

iperf Done.
root@serv3:~# iperf3 -c 192.168.200.1 -p 5006 -R
Connecting to host 192.168.200.1, port 5006
Reverse mode, remote host 192.168.200.1 is sending
[  5] local 192.168.200.7 port 44692 connected to 192.168.200.1 port 5006
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  41.9 MBytes   351 Mbits/sec
[  5]   1.00-2.00   sec  43.8 MBytes   367 Mbits/sec
[  5]   2.00-3.00   sec  45.4 MBytes   381 Mbits/sec
[  5]   3.00-4.00   sec  42.8 MBytes   360 Mbits/sec
[  5]   4.00-5.00   sec  45.4 MBytes   382 Mbits/sec
[  5]   5.00-6.00   sec  43.2 MBytes   361 Mbits/sec
[  5]   6.00-7.00   sec  40.9 MBytes   344 Mbits/sec
[  5]   7.00-8.00   sec  44.0 MBytes   368 Mbits/sec
[  5]   8.00-9.00   sec  36.7 MBytes   309 Mbits/sec
[  5]   9.00-10.00  sec  43.9 MBytes   367 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.04  sec   431 MBytes   360 Mbits/sec  291             sender
[  5]   0.00-10.00  sec   428 MBytes   359 Mbits/sec                  receiver

iperf Done.

Alles anzeigen

Parellele Streams macht doch ganz gut was aus.